The name KARITES comes from the "Tree Graces" (Charites), ancient Greek mythology figures who embodied and protected the principles of absolute beauty, elegance and perfection.
Inspired by their model, KARITES' overwhelming performance in "strength", "clearness" and "easy application" proudly shows and aims to offer the same "divine" protection.
Despite being only 0.21mm thin, KARITES glass protector can reach the strength of a more than 9H hardness, in order to strongly protect your camera monitor from any accidental shock and scratches.
In addition, by applying an AR (anti-reflection) coating for light reflection reduction, and with a more than 95.0% high transmission rate, KARITES glass protector guarantees "high visibility" also in outdoor environments.
For KARITES, too, Kenko aims to pursue the highest and all made in Japan quality by performing all the producing processes, from glass cutting to polishing, from "Anti-stain/anti-fingerprint coating" to "Round edge processing", up to the final packaging process.
Particularly, Japanese technology and processing have been employed to make KARITES glass protector comfortably usable thanks to a very smooth touch feeling during every handling operation.
By adopting newly invented "handle seals", KARITES glass protector makes its application very smooth, easy and possible in three quick steps: "placing", "pressing" and "peeling".
PIC
Before applying the screen protector, please clean the camera screen to remove eventual dirt or dust.
Peel off the underside film of the protector by holding the knob in the lower right corner.
Hold both the "handle seals" of Escorte screen protector and position it precisely, then place it on the camera monitor.
After placing the screen protector on the camera screen, press on "push" to be sure it is properly pasted and slightly press all over the surface to make sure it adheres homogeneously.
After pasting the screen protector, hold the "handle seals" and complete the application by peeling off the upper film.
Note: Protective film for upper side panel monitor not included.
Supported Camera Model | Protector Model | Dimensions (WxH), mm | JAN Code |
Canon EOS 5D Mark IV / 5D Mark III | KKG-CEOS5DM4 |
70.9x48.6 (*45.5x18.3) |
4961607878378 |
Canon EOS 7D Mark II | KKG-CEOS7DM2 | 67.1x46.0 (*) | 4961607878484 |
Canon EOS 6D | KKG-CEOS6D | 68.6x47.6 (*) | 4961607878828 |
Canon EOS 80D / 70D | KKG-CEOS80D | 67.2x45.8 (*39.8x20.0) | 4961607878385 |
Canon EOS M6 / PowerShot G9X MarkII / G7X MarkII/G5X | KKG-CEOSM6 | 76.5x51.1 | 4961607878835 |
Canon EOS M5 | KKG-CEOSM5 | 78.6x52.7 | 4961607878392 |
Nikon D810 | KKG-ND810 | 66.8x50.7 (*) | 4961607878842 |
Nikon D750 | KKG-ND750 | 66.8x50.7 (*39.2x17.2) |
4961607878408 |
Nikon D500 | KKG-ND500 | 66.8x50.7 (*44.5x22.5) | 4961607878415 |
Nikon D7200 / D7100 | KKG-ND7200 | 66.8x50.7 (*) | 4961607878491 |
Nikon D5600 / D5500 | KKG-ND5600 | 76.2x58.6 | 4961607878859 |
Pentax K-1 | KKG-PEK1 | 76.3x58.6 | 4961607878873 |
Pentax KP / K-70 / K-S2 | KKG-PEKP | 63.2x42.1 | 4961607878538 |
Sony alpha 7SII / 7RII / 7II | KKG-SA7M2 | 70.5x51.8 | 4961607878866 |
Sony CyberShot RX100V / RX100 / II / III / RX1R II / RX1R / RX1 | KKG-SCSRX100V | 70.5x51.8 | 4961607878514 |
Fujifilm X-Pro2 | KKG-FXPRO2 | 64.4x44.3 | 4961607878521 |
Fujifilm X-T2 | KKG-FXT2 | 76.8x50.0 | 4961607878422 |
Fujifilm X-T20 | KKG-FXT20 | 69.6x44.6 | 4961607878477 |
Olympus E-PL8 / E-PL7 / E-M10 / E-M1 | KKG-OEPL8 | 75.7x52.0 | 4961607878507 |
* Protective film for upper side panel monitor included.